AntiHijack 1 & 2 helps protect you against car jacking.
Click video link for full demo of AntiHijack
Please note, by switching Anti-hijack on this will void Thatcham rating of this alarm system
Start and warm up your car
from your smartphone, with
your Pandora security system
still fully armed.
*Spare key maybe needed.
PANDORA LIGHT PRO V2
Larger OLED screen, rechargeable battery & NEW LoRa long range technology.
Our best selling alarm system just got even better! Now with an all new OLED screen with larger display and icons displaying each alarm notifications clearly. Lock/unlock your vehicle securely from the military grade encrypted 128bit pager remote, which protects you against relay theft. Now also features LoRA technology, giving the remote better control in built up areas where there’s lots of radio interference, giving you a distance of up to a mile range. The original triple AAA batteries have now been replaced with a full built in lithium ion rechargeable battery. Now enjoy weeks of battery power in between charging.
1 Mile Range
Larger OLED display
128bit military grade encryption
Rechargeable Li Lon Battery
Your tag is your driver recognition pass..
All NEW upgrade Bluetooth 5.0 chip, our immobiliser tags are now even more secure, with a longer range. Fully adjustable via the pandora Bluetooth app and featuring Pandora’s military grade 128bit encryption.
Immobiliser tag work on close proximity of the car, allowing you to still securely use your factory OEM remote.
The tag is used as a way of telling your Pandora alarm system you are the authorised user. If the TAG isn’t in close proximity to the vehicle when you press the unlock button, then the Pandora system simply won’t disarm, keeping the engine immobiliser and all the layers of security fully ARMED! However, if the TAG is in close proximity, the system will disarm, completely handsfree.
Tag is also used for other features such as Anti-Hijack and Handsfree Arming/locking. (Vehicle dependent)Please note, by switching Anti-hijack on this will void Thatcham rating of this alarm system
Pandora BT app for IOS & Android devices.
Gives you the user, full control over your system through Bluetooth. Simply download the app on to your Android or IOS device and Connect securely to your Pandora alarm system.
Arm/disarm your alarm system.
View important vehicle perimeter such as engine temperature - Battery voltage - internal cabin temperature & Fuel reading
Control and set up remote engine start. Automatically start your car at set times of the day, or when the outside temperature hits a set amount.
Fully control all Tilt - Shock - Movement sensors levers, with easy to use sliders
(not including Additional sensors)
Control and set up tag distance as well as Handsfree arming.
And much more..
What’s inside this NEW box of tricks?
The heart of the alarm system. Now featuring The latest Bluetooth 5.0 chip, meaning lots of options to upgrade. The system will now wireless connect to up to 10 wireless devices. Including 5 x Bluetooth battery sensors, 3 x Bluetooth wireless hidden immobilisers. As well as our new Bluetooth siren and OLED Bluetooth remote/tag.
LoRa long range RF frequency. As well as all new power supply, giving this alarm system the best power draw of any alarm system in the world. This Pandora system will draw as little as 8milli amps. And even less when it enters intelligent sleep mode after roughly 24hours. No more returning to your vehicle and a bead battery due to your after market alarm system.
NOTE ON INSTALL:
All our Pandora systems are designed to work on almost any vehicle. But every vehicle manufacturer is different. On most installs, our systems talk digitally through the vehicles CANbus network or by adding external temperature sensors. The information read by the alarm system through the CANbus network won't always be exact. Therefore in some small cases the fuel, temperature and other vehicle perimeters may not display on the Pandora app vehicle dependent. If they do display, most of the time we can adjust to be as close as we can to the true reading. Normally between 0-20% of the original vehicle reading itself.
Vehicles factory OEM alarm systems.
Most modern cars are fitted with a factory immobiliser and/or alarm system. These alarms can be updated by the vehicle manufacturer at anytime when your vehicle goes in for a service or remotely at anytime through the SIM card built into the vehicles BCM. To gain control of the OEM alarm system on any vehicle fully, we sometimes need to use an external Pandora Module (POA) which controls your spare OEM remote. This then gives your Pandora system full control of your Factory settings, including on some vehicles mirror closure, dead locks, roof closure and control of the OEM arm and disarm. On some vehicles if the extra module is not used, you will still be able to arm the pandora and lock the vehicle through your OEM remote and the Pandora remote/app. However on some vehicles, You can disarm the Pandora and unlock the car remotely through the OEM remote, but not through pressing disarm on the Pandora control. Please ask your installer for more information on your vehicle.
Additional sensor The additional proximity sensor with warn away can be added to any of our alarm packages for an extra £50.00. this will give two zones. Zone 1 senses internal motion inside the vehicles cabin. Zone 2 senses motion just outside the vehicle, sensing motion on the front two doors just inside the wing mirrors
We have found the proximity and warn away sensor work on 80% of vehicles with no issues. However, some vehicles that are fitted with internal factory and aftermarket electrical wireless antennas can interfere with the sensor causing intermittent false alarms. Factory fitted DAB antennas, internet modems or dongles, security sensors, trackers and other aftermarket wireless devices including dash cams and trackers, can cause interference to the sensor causing Intermittent false alarms. or the sensor not to work at all. Your installer will fit this sensor as an extra to your alarm if requested. If after the system is fitted and the sensor does false alarm or not function, it will need to be disabled in the smartphone app or removed completely. In some cases the false alarms are caused by the sensor being set too high and simply turning it down will stop most false alarms. However, It is advised that you do not buy this alarm system solely for this sensor as it may not work on your vehicle and may need the external zone disabling.